Whether you ski or snowboard, you want the best ride possible. You would be shocked, maybe, if you new the difference that tuned and waxed skis can have on your day. You'll notice it even more when the conditions are far less than ideal such as icy conditions. It really depends on where you live and spend your time skiing. It can be really easy to get complacent when you ski at the same place all the time. We'd like to talk more about tuning and waxing tips you can use on your skis and snowboards, but do be sure you continue learning more about it.
Having a good edge and wax job on your skis is a good idea for various reasons. We're not only talking about performance, but also safety because you can fall for reasons such as dull edges. Dull ski edges can be a major bummer when you're skiing on ice because your skis won't be able to grip properly. If your skis don't grip, then you'll spend a lot of time falling down and getting up. When it comes to wax, it's not only whether or not your skis have a good wax job on them, but also the wax needs to be right for your conditions. Temperatures can be a big factor, as well. If it's too cold outside for the wax that you used, it can cause you to slow down. So be sure to take all these factors into consideration when you're planning ahead.
You can do yourself a lot of good by simply doing the minimum maintenance to your ski base and edge. It's always recommended to do as much as possible, but not everyone has the time to do that. If you tend to take a minimalist approach to these things, then be sure to do at least basic care for your skis or snowboard. You should always dry your gear after a day on the mountains. Hit the edges of your skis with a diamond stone to maintain a sharp edge. With a little experience, you will know when the edge is sharp.
When waxing your skis, you will be safer if you go with one for slightly colder temperatures. There is a simple reason for this. A higher temperature condition wax in the wrong conditions will make your skis a bit on the sticky side. That means you won't be gliding as well, or as fast, as you hope which is very frustrating. You're out there to ski, not to skate. You want to iron the wax on to your skis. You should avoid lingering one spot too long just like when ironing clothes. You don't want to produce smoke when you're doing a hot wax job. Let the ski cool for about half an hour before doing anything else with it.
There are many more tips and tricks available for waxing and tuning your skis and snowboards. Or you can avoid it altogether and take your equipment to a local ski shop to have it done.
Having a good edge and wax job on your skis is a good idea for various reasons. We're not only talking about performance, but also safety because you can fall for reasons such as dull edges. Dull ski edges can be a major bummer when you're skiing on ice because your skis won't be able to grip properly. If your skis don't grip, then you'll spend a lot of time falling down and getting up. When it comes to wax, it's not only whether or not your skis have a good wax job on them, but also the wax needs to be right for your conditions. Temperatures can be a big factor, as well. If it's too cold outside for the wax that you used, it can cause you to slow down. So be sure to take all these factors into consideration when you're planning ahead.
You can do yourself a lot of good by simply doing the minimum maintenance to your ski base and edge. It's always recommended to do as much as possible, but not everyone has the time to do that. If you tend to take a minimalist approach to these things, then be sure to do at least basic care for your skis or snowboard. You should always dry your gear after a day on the mountains. Hit the edges of your skis with a diamond stone to maintain a sharp edge. With a little experience, you will know when the edge is sharp.
When waxing your skis, you will be safer if you go with one for slightly colder temperatures. There is a simple reason for this. A higher temperature condition wax in the wrong conditions will make your skis a bit on the sticky side. That means you won't be gliding as well, or as fast, as you hope which is very frustrating. You're out there to ski, not to skate. You want to iron the wax on to your skis. You should avoid lingering one spot too long just like when ironing clothes. You don't want to produce smoke when you're doing a hot wax job. Let the ski cool for about half an hour before doing anything else with it.
There are many more tips and tricks available for waxing and tuning your skis and snowboards. Or you can avoid it altogether and take your equipment to a local ski shop to have it done.
