Wednesday, November 16, 2016

Steps On How To Do A Chimney Cleaning

By Christine Scott


Chimneys are types of structures that are providing a proper ventilation for smoke and flue gases that are coming from stoves, fireplaces, boilers, or furnaces towards the outside atmosphere. Typically, these are positioned vertically for ensuring that gases are flowing smoothly upwards. A flue is the space inside the chimney. Chimneys are often found in steam locomotives, ships, and buildings.

There are times when burning fires are not avoided from a chimney and these usually cause a fire because of those some substances that are sticky and flammable like creosote and soot. Doing the chimney cleaning Windsor Locks CT is done not only by hiring some professionals but may be done also through doing it by yourself. This article will be giving you the steps in doing it in a simple way.

The following steps are to be done in 4 methods. First preparing to clean the chimneys. Before you start, you must have to determine if the chimney will be needing the cleaning process. It would be important that the chimney is cleaned once a year. If these are used more frequently, to clean it often is needed. Also try to check some animals living in it sine at times, you may not check it for a while.

The next step is measuring its flue. If you are doing all the methods for cleaning, see to it that you are making use of the appropriate tools and these have to be in appropriate sizes to fit the flue. All sides of the fireplace and also up to the top part must be measure properly. There are some hardware stores in your local place where in you can purchase the needed materials.

Dressing appropriately is also needed to avoid your new clothes in getting the dirt out from the soot. Old clothes are recommended to be worn. In order to cover your hair, you may use a bandanna, to protect your hands, use gloves, and to protect your eyes, use goggles. Your floor should be covered also with either a plastic tarp or a drop cloth to avoid dirt.

Second is cleaning first the top and to the bottom. Get a ladder to climb up unto the roof. The ladder may also be set up outside the home when climbing unto your roof, but just make sure that it is safe. Next is assembling the brush and the pipe section for flue scrubbing. There are several sections available that can be added into the pipe to make the brush longer.

The third method is to clean from bottom to top. Steps in the second method are also applied in using the pipe sections and brushes. After doing the same steps to clean from the bottom to the top, use the pulley system along with a brush and place it on the roof.

During this step, you need someone in helping you hold the rope and dropping it, from which the brush is being attached to the center. Then together, work by utilizing the ropes by pulling the rope up and down. By this, the brush will be scrubbing a chimneys flue.

Then lastly is to clean the entrance of flue by the use spade and shovel. Then after, reattach the removed damper handle. The plastic tarp or the drop cloth may have some debris, so it can be cleaned by a broom and a dustpan.




About the Author:



Related Posts Plugin for WordPress, Blogger...